ESI IVX C-Class Podręcznik Użytkownika Pobierz pdf (Strona 12)

Function 1: System parameters IVX C-Class Administrator’s Manual

B.2

Function 142: Automatic time setting

1. Synchronize with CID

This function, when enabled, synchronizes the real-time clock with Caller ID (CID) messaging:

call processing compares the time of a CID message to the system real-time clock and, if the

difference is more than two minutes, resets the real-time clock to match the time (hours and

minutes) of the CID message. The system will analyze each such message (or — if it receives

more than four calls with CID information within a one-minute period — as is needed). Select

ENABLE or DISABLE by pressing a scroll key (either





). Choosing ENABLE will allow

the CID data to update the time and date.

Default: Enabled.

2. Adjust for Daylight Savings Time

This function, when enabled, causes the real-time clock to adjust itself automatically for

Daylight Savings Time (DST). Select AUTO or DISABLE for DST by pressing a scroll key

(either





). Choosing DISABLE is best for those areas that don’t observe DST.

Default: Disabled.

Function 17: System speed-dial

Up to 100 system speed dial names and associated numbers can be stored, in location numbers 600–699,

for access by any station. A user can initiate a system speed-dial by dialing the speed dial location number

or by accessing the name through the Esi-Dex feature. In Function 32, access to system speed-dial can

be denied to individual stations (see page C.1).

Note: System speed-dialing overrides toll restrictions (Function 32, page C.1).

1. Enter the 3-digit location number to program,

2. Enter a ten-character name (see “Entering alphanumeric characters,” page A.5).

3. Enter the number to be dialed (including the line group 9, 8, or 7). Press the left scroll key (



) to

delete any character or digit entered in error. Here’s an example:

Speed Dial #

Name

Number

601 AUTO RENTL 915552221212

The number dialed in Step 3 can be up to 30 digits long

including the special codes shown at the right.

To insert a special code, press the right scroll key (



) to select

the desired special code: # ,



, F or P.

Press # to confirm the inserted character and continue. Press # # to complete the entry.

Use the left scroll key (



) to backspace.

Once the number is saved you can use the scroll keys to move back and forth to view the number.

To edit the number, you must delete it and enter the correct number.

Example: To create a system speed-dial number that dials 9, then 972-555-5644, then pauses for

four seconds and finally dials #104, enter:

9 9 7 2 5 5 5 5 6 4 4 (then scroll to) P # (then scroll to) P # (then scroll to) # # 1 0 4 #

Deleting a speed-dial number

To delete an entire speed dial number and name, delete the location number (6 X X) by pressing HOLD

or the left scroll key (



) during Step 1 in the speed-dialing procedure described above.

Code What it produces

# # DTMF tone



DTMF tone

F Flash hook

P 2-second pause

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Komentarze do niniejszej Instrukcji

Brak uwag

ESI IVX C-Class Podręcznik Użytkownika Strona 12

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Telefony ESI IVX C-Class